Flamer Gun Drone
Printer friendly version | Rate this Article | Comment on this Article
Thanks to GreyDeath for this.
This took me three tries to make. I made the first one based off of the fact that others have made this in the past and so I have put the flamer on one side and the flame box on the other side where the pulse carbines would normally go.
But I wanted to go one step further so I made a new version much like my Crayfish design with the flamer on top and the carbines under so it's an improved gun drone.
I posted it and with great feedback from Tau Online I was given the inspiration and feedback to put the flamer underneath the gun drone, between the pulse carbines; so I did! And so in three steps the Flamer Gun Drone was invented.
It's also easy to make: Just cut a piece of sprue and mount it under the rear jets facing forward, mount the flamer off this. The flamer fuel box is cut off and mounted onto the sprue arm. A little cutting and trimming and you've done it.
[Original design]
If you like this site, please consider helping us out greatly by donating to us.
Rate this Article
This article currently has a rating of 6.6 (out of 10).
You must be logged in to rate this article. Please login or register to continue.
Comment on this Article
This article has been commented on 19 time(s).
You must be logged in to comment on this article. Please login or register to continue.
| Comment made by wood on 06:36:34, 20 April 2008
|
| dont like it
|
| Comment made by 000676048 on 17:09:40, 5 January 2008
|
| I don\'t believe in drones having flamers because it doesn\'t make sense, but you did a nice job.
|
| Comment made by Zerotrousers on 21:19:35, 19 December 2007
|
| I like it, but can I just state that the original design doesn\'t make any sense? The flamer would hit the drone...
|
| Comment made by darklightknight448 on 08:54:50, 18 December 2007
|
| Amazing! Amazingly amazing! Amazingly amazingly amazing! Amazingly... (goes on for about an hour and half)
|
| Comment made by Daempera on 21:19:31, 24 November 2007
|
amazingly cool!
|
| Comment made by Shas'O Check'Sa Bar'naby Kias on 06:37:06, 21 October 2007
|
| I like the conversion, I made up rules for one of these. Same as gun drone, except 11 pts.
|
| Comment made by rocker360 on 10:04:24, 15 October 2007
|
| nice
|
| Comment made by piggy on 16:56:10, 3 October 2007
|
| cool!
|
| Comment made by Shas'ui T'au Kais on 05:27:24, 29 September 2007
|
| looks very very cool
|
| Comment made by Eraj on 08:36:08, 27 July 2007
|
| That's great! I'm makin' one of those!
|
| Comment made by DRobot on 23:55:48, 13 July 2007
|
| i like it but yeah maybe you should have taken the pulse carbines off, or at least one and put the flamer in its place. but still nice, i cant do any better
|
| Comment made by .::cmd.Farsight::. on 15:26:21, 2 July 2007
|
| clever, but maybe pull the pulse carbines off?
|
| Comment made by Karashi Lissera on 14:38:42, 31 May 2007
|
| nice but you shoul dof taken the pulse carbines off
|
| Comment made by Sven-Kaiser of Krieg on 08:33:21, 11 April 2007
|
| +++I think you should have taken pulse carbines off. But good.+++
|
| Comment made by goth bass player on 02:37:06, 9 April 2007
|
| thats awesome burns those !#@%!1ers
|
| Comment made by Aunvre on 09:30:12, 22 December 2006
|
i like it!
|
| Comment made by Sting on 05:58:14, 13 November 2006
|
| Whoa, how does it stay in the air?
|
