Eldar Warp-Gate from TauOnline.Org

Home >> Scenery >> Eldar Warp-Gate >> Printer-Friendly Version

Thanks to Hanging Dragon for this

This piece of terrain is actually far easier than it looks:

You will need:

Card or foam core
Spak Filler
Modelling knife
Graph Paper
Pencil
Flock
Costume Jewellery
Eldar Codex
Electrical wire

On page 3 of the Eldar Codex you will see a profile of an Eldar Warp gate overlaid with graph paper. Copy this onto your own graph paper in the scale you want it. Cut out the copy and you now have a template for the Warp gate. Using the template, cut out enough gates to make about 1" thickness when stuck together, you can also use a Styrofoam Also known as polystyrene) sheet of sufficient thickness if you have one. Glue your creation onto a base, then use a filler paste to smooth over the whole model and even it out to make it look like a solid piece.

Glue on the extras like the electrical wiring and costume jewellery then paint the model and flock the base. That's it!

Picture Notes:

[Image] The finished warp-gate

Warpgate1 - The finished product.

[Image] The finished warp-gate with gems for added effect

Warpgate 2 - The addition of cheap costume jewellery can make an ordinary piece of Eldar terrain quite stunning. These gems where once earrings and a broach.